[. . . ] Cut along the dashed lines to match your language with the illustrations. Do not use this product for any purpose not explicitly specified by manufacturer. [. . . ] verify that there are adequate threads to secure the brackets to the monitor. If you encounter resistance, stop immediately and contact customer service. Use the shortest screw and spacer combination to accomodate your needs. Using hardware that is too long may damage your monitor's internal components. Position the assembly over the TV and slide the vertical brackets left or right until they are over the mounting holes in the back of the TV. Make sure vertical brackets [06] will be equally spaced top to bottom on the TV and that the assembly will be level. If you need extra space to accommodate cables, recesses, or protrusions, see an installation option (1-1 or 1-2) that uses spacers. For special applications, or if you are uncertain about your hardware selection, contact Customer Service. Lock the horizontal brackets [02] and [03] in place with 4 screws [32] using the 3/16" hex key [29]. Wall Mounting For assistance in determining wall plate location, see Height Finder at sanus. To prepare the wall plate for mounting: Slide the arms of the wall plate [08] together and insert the slide lock [33] into place. This will lock the arms into full extension making the wall plate mounting and TV attachment easier. Verify the center of the stud with an awl or thin nail or use an edge to edge stud finder. Using the wall plate template [01], Level the template [01] and mark the hole locations. [. . . ] Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. [. . . ]